Views: 365 Author: Site Editor Publish Time: 2022-01-06 Origin: Site
Since the compact pressureless solar water heater uses an open pressureless water tank, the hot water outlet pressure is affected by the installation height of the solar water heater's water tank. If you install a non-pressure solar water heater, then you can get pressurized hot water through the following methods, and get a better comfortable experience when taking a bath.
1. Increase the height difference between the hot water outlet and the water tank.
Non-pressurized solar water heaters rely on gravity to produce hot water. Simply put, the installation height of the water tank is higher than the water end, the greater the height difference, the greater the water outlet pressure.
2. Install a booster pump on the hot water outlet pipe.
The booster pump is composed of pump + water flow switch + power supply. When the faucet is turned on, the water flow switch immediately starts the switch, the power is turned on, and the water pump starts to run to increase the water flow pressure.
Therefore, installing a booster pump on the hot water outlet pipe of the pressureless solar water heater can increase the water pressure and make the use more comfortable.
