SFH-H Integrated Pressurized Solar Water Heater For Hot Areas

1.1 Overview

• SFH_H is integrated pressurized solar water heater specially designed for hot low latitudes.
  

• SFH_H system is the integrated pressurized solar water heater for domestic hot water that relies on the principle of thermosyphon to actively carry out natural circulation.            

• SFH_H system is mainly including 150L, 180L,  200Land 300L, to meet the needs of families in different regions. It is especially suitable for low-latitude, warm or hot areas.            

1.2 Structure

Product details please check here :

1.3 Working Principle

2.1 Characteristics

• The natural circulation is actively carried out by the principle of thermosyphon, and the pressure of the hot water is large and equal to the running water pressure.

• The water tank is a pressure-bearing structure, with a test pressure of 0.9Mpa and a working pressure of 0.6Mpa.The inner tank material is food grade stainless steel SUS304 by fully automatic argon arc welding and double-sided argon gas protection. Inner tank can be used for more than 15 years.

  Soldering video check here:

• The solar water tank is insulated with polyurethane having independent bubbles and foaming density 36KG/m3, which results in less than 2 °C temperature drop of hot water within 12 hours. The temperature can maintain at 25 ° C for 24 hours, and be not deformed for a long time.

• The solar heat pipe is a phase change heat transfer design with fast heat energy start-up speed. When heat pipe is under sunshine, its temperature can reach 222 ° C soon, conbributing to making high temperature hot water. The system uses double-layer solar vacuum collector tube with AL/N/AL/SS/CU coating, absorption rate >92%, reflectivity<8%. and service life 15 years.

2.2 Specifications

2.3 Size

3.1 Installation

• SFH-H system can be installed on the ground, on a flat roof or on a sloping roof. The frames need to be fixed connected with mounting base (ground or roof).

• Installation and use steps:  select the installation location, assemble frames, place water tank on the tank holder, install solar heat pipes, connect hot and cold water pipes, add water into tank to check there is leakage or not, fix the system, use in normal, make regular inspection and maintenance.

  Please check here for installation methods and procedures :

3.2 Cases

• 1st sunflower has passed certifications from different quality management systems and  product testing institutions. such as ISO9000, CE, Solarkeymark, SRCC, BV, SGS, Watermark etc.

• Solar vacuum tube and bracket: 5 years.

• Water tank: 3 years.

• The solar vacuum tube with heat pipe is packed in carton, and the carton is equipped with anti-pressure foam. We will add plywood cases extraly for package of goods under LCL shipment.

• The package design can be stacked and stored, but the base layer should be flat and evenly stressed. The maximum stacking level of the solar vacuum tube is 17 levels.